Campus Switching and Routing

Reply
New Contributor

HP ARUBA 2930F SWITCH

Hi, 

 

I am new to this community and wanted to learn more about hp switches

Currently we have hp 2930 as stacks using chain topolgy.

We have several vlan setups.

I am struggling to configure member 2 in the stack through the commander.

For example if I want to configure a port which is located on switch member 2 port 2/34 onto (vlan office) from (Vlan Reception) what are the commands. 

If someone can tell me step by step commands please much appreciated.

 

Regards

Re: HP ARUBA 2930F SWITCH

Are these all part of the same VSF?


ACMA, ACMP, ACSA
If my post addresses your query, give kudos:)

Re: HP ARUBA 2930F SWITCH

On ArubaOS switches, you configure the VLAN and then attach ports to it either untagged or tagged.


For example if your Office VLAN is VLAN2, and port 1/8, 2/2 through 2/5 must be access ports in that VLAN, and port 1/5 is the (tagged) uplink, the config could be like this:

vlan 2
   name "Office"
   untagged 1/8,2/2-2/5
   tagged 1/5
   ip address 10.254.1.1 255.255.255.0
   exit

Is that what you are looking for?

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: