Campus Switching and Routing

Reply
New Contributor

How can I config dot1x with wire authentication on Aruba Switch S1500-48P

I have problem on Switch Aruba S1500-48P 

Firmware 7.4.1.5 

Can't config dot1x with wire to authentication

Re: How can I config dot1x with wire authentication on Aruba Switch S1500-48P

New Contributor

Re: How can I config dot1x with wire authentication on Aruba Switch S1500-48P

Thanks!  Herman Robers 

I read it on ArubaOS 7.2 User guide document told me to generate certification CSR.

I generate some code so I need to copy that code on 

-----BEGIN CERTIFICATE REQUEST-----

My code

-----END CERTIFICATE REQUEST-----

I need to copy this code and send some email to CA?

That all I want to do if I want to configuration dot1x?

 

Thanks :D

 

Re: How can I config dot1x with wire authentication on Aruba Switch S1500-48P

If you are using an external RADIUS server for the 802.1X and no captive portal redirects on the switch, you don't need a certificate on the switch.

 

For 802.1X you only need a certificate on the switch if you do EAP Termination. Recommended is to use an external RADIUS server for that.

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: