Campus Switching and Routing

Reply
New Contributor
Posts: 1
Registered: ‎07-21-2014

Is there a way to import a Cisco configuration into an Aruba s2500 switch?

Our district just got Aruba s2500's in and we were wondering, if there was a way we can easily use the configuration from our Cisco 3750 switches for the Aruba switches. We're planning on using a trunk port to go from the Cisco Switch to the Aruba switch as well.

 

Thanks!

Guru Elite
Posts: 8,458
Registered: ‎09-08-2010

Re: Is there a way to import a Cisco configuration into an Aruba s2500 switch?

[ Edited ]

The Aruba MAS configuration is profile based so you cannot import the configuration directly.

 

Some of the commands are similar though, for example:

 

interface vlan 10

ip address 10.1.1.1 255.255.255.0

no shut

 

show ip interface brief

show vlan

 

 


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Search Airheads
Showing results for 
Search instead for 
Did you mean: