02-23-2016 10:56 AM
I am looking to query a S3500 switch to see if there are any ports that are currently patched in that haven't been used in a while? Is there a command that will show when each port last had something connected to it?
03-06-2016 08:19 PM - edited 03-06-2016 09:30 PM
I'm by no means a master in ArubaOS(so there may be a better way to do this), but the only related information I can think of would be found by running a
#show interface gigabitethernet x/x/x
(26-P12) #show interface gigabitethernet 0/0/0 GE0/0/0 is administratively Up, Link is Up, Line protocol is Up Hardware is Gigabit Ethernet, Interface is GE0/0/0, Address is 00:0b:86:a8:e9:42 Encapsulation ARPA, Loopback not set Configured: duplex (Auto), Speed (Auto), FC (Off), Autoneg (On) Negotiated: duplex (Full), Speed (1 Gbps) Interface index: 1 MTU 1514 bytes Link flaps: 19 Flags: Trunk, Trusted Link status last changed: 1w0d 07:06:54 ago Last update of counters: 0d 00:00:05 ago Last clearing of counters: 2w0d 07:00:15 ago
It will list:
Link status last changed: 1w0d 07:06:54 ago
Anything that is currently down (no link) with no 'link status change' in over 4+ weeks is probably safe to assume does not have a device patched in.