02-20-2016 12:08 PM
We recently replaced our last locations hardware with an Aruba deployment. On most of our other sites we use an Alcatel OmniSwitch6900 for routing and the ip helper command is pretty straight forward.
I was reading some documentation on an AP controllers commands because I didn't have luck finding ip-helper documentation on the MAS series. But they don't seem to translate over to the MAS S3500 switch commands.
interface vlan 10 ip helper-address x.x.x.x
Comes up as an unrecognized command.
Are the MAS switches capable of DHCP helpers on vlans?
Solved! Go to Solution.
02-20-2016 12:29 PM