Campus Switching and Routing

Reply
MVP
Posts: 1,110
Registered: ‎10-11-2011

MAS: remove all interface from interface group

Is there a good way to remove all interfaces from an interface group with one command?  "apply-to remove all" does not work.  You can do "apply-to remove 0/0/0-1/1/1" (ending in 1/1/1 assuming you have 2 stack members) but the command has to be entered twice as it clears the first stack member ports, but leaves behind the second stack member ports.  Any thoughts?  BTW, this is version 7.3.2.0.

=======================================
If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users.
Aruba
Posts: 429
Registered: ‎05-30-2012

Re: MAS: remove all interface from interface group

Try "no apply-to".

 

Best regards,


Madani

MVP
Posts: 1,110
Registered: ‎10-11-2011

Re: MAS: remove all interface from interface group

Ah!  That never crossed my mind... thanks Madani.

=======================================
If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users.
Aruba
Posts: 429
Registered: ‎05-30-2012

Re: MAS: remove all interface from interface group

No prob. :)

Search Airheads
Showing results for 
Search instead for 
Did you mean: