Campus Switching and Routing

Reply
MVP
Posts: 3,015
Registered: ‎10-25-2011

Mobility Access Switch Aggregate different port speeds

Hello

I want to know if this is possible

 

Lets say you have 2 buildings

 

In each building you have 1 switch

 

We will be  doing a remote Stacking betweent both switches so even if the switches are located in differente buldings you see it as one switch

 

 

Let say on anoter building we have another switch.

We would like to do a link aggregation to those swithces, 1 port of 10G to one of them and maybe 3 ports of 1 gigas to the other swithc on the other building

 

It is possible to aggregate ports of differnets speeds in a link aggregation and have it active active so it use all the LAGG partners to send traffic as well?  And well also taking in mind that youa re having a remote Stacking.

 

Cheers

Carlos

----------------------------------------------------
Product Manager - Aruba Networks
Alternetworks Corp
MVP
Posts: 4,307
Registered: ‎07-20-2011

Re: Mobility Access Switch Aggregate different port speeds

Screen Shot 2015-10-28 at 9.03.44 AM.png

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
MVP
Posts: 3,015
Registered: ‎10-25-2011

Re: Mobility Access Switch Aggregate different port speeds

Thank you!!!
----------------------------------------------------
Product Manager - Aruba Networks
Alternetworks Corp
Search Airheads
Showing results for 
Search instead for 
Did you mean: