Campus Switching and Routing

Reply
Contributor II
Posts: 56
Registered: ‎04-13-2009

Mobility Switch

I have a design question.  I have a customer that would like to install the Aruba switches in tunneled node.  However, they would like to have it where if the master controller failed it will just operate like a L2 switch.  Is this supported?  If so how would you go about programming such a setup?

Aruba
Posts: 429
Registered: ‎05-30-2012

Re: Mobility Switch

John,

That is not currently supported.

 

You can have a backup controller configured or point the TN ports to a VRRP address of a controller pair.

 

Best regards,

 

Madani

Contributor II
Posts: 56
Registered: ‎04-13-2009

Re: Mobility Switch

Okay. That is what I thought but before I told the customer no I wanted to check. Thank you for responding!
Search Airheads
Showing results for 
Search instead for 
Did you mean: