04-05-2012 03:08 PM
It is possible to map AAA profiles to Vlans on the Controllers. That said with tunnel-node Vlan reference on the MAS side I assume its possible to map/reference a different AAA profile from the Controllers global Wired Access AAA Profile. Can anyone confirm or deny?
04-05-2012 03:30 PM
Yes, different aaa profiles can be applied to different tunneled-node vlans with the following command:
(aruba-controller) (config) #vlan 100 wired aaa-profile wired-cpdot1x
aaa profile "wired-cpdot1x" is applied to vlan 100.