Campus Switching and Routing

Occasional Contributor I

NTP server problem

Hi all,


I am trying to launch Controller setup wizard. I don't use NTP server for time synchronization, just want to keep local time [see pictures 1 NTP].


But at the end of setup I have an error [see picture 2 error] that 'Cannot delete the NTP server', but NTP server has never been installed at all.


What You will suggest me to do?

Re: NTP server problem

I would either restart the wizard or put a dummy NTP server in ( is a good one, that you can even use if you have internet access).


After the wizard finishes, you can change/delete NTP again if you like under Configuration -> Management -> Clock.

If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
Search Airheads
Showing results for 
Search instead for 
Did you mean: