04-13-2017 12:35 AM
We are using controllers in standalone mode with firmware 220.127.116.11 (latest AOS8 release).
These controllers are connected to multiple gateways. We would like to do Policy Based Routing (PBR) to associate some user roles with some specific gateway (and not the default one).
I have found an article explaining how to do it: https://community.arubanetworks.com/t5/Controller-Based-WLANs/How-to-bind-a-router-ACL-to-user-role-for-implementing-PBR/ta-p/234522
But when done on AOS8, the PBR doesn't work, the packet are still sent to the default gateway.
Here are the commands used:
ip nexthop-list my-list ip 10.10.16.1 priority 1 exit ip access-list route my-acl network 10.10.128.0 255.255.128.0 any any route next-hop-list my-list exit routing-policy-map role my-role access-list my-acl
I have tries to apply the acl to different roles (unauthenticated, authenticated), but it doesn't seem to work.
04-13-2017 12:42 AM
why do you need PBR?
If you have different roles and they're in different VLAN's you will get the default gateway via DHCP.
ACMX #567 //ACCP//CWNA//CWAP