02-28-2017 05:27 AM
we are operating aprox. 600 Procurve 2620 switches.
I use a perl script to connect via telnet and send a command to put the running.-config to a file on a tftp-server.
About 40 of this files are empty, all others are fine. They are working all on newest firmware and i already compared two running-configs at a working put and a non-working put, but found no differences except the IP and Hostnames. I also tried to get the startup-config, same problem.
Does anyone have an Idea?
THX a lot for your suggestions
regards from cologne / germany