Campus Switching and Routing

Reply
Frequent Contributor I
Posts: 61
Registered: ‎01-18-2012

Procdure to replace a switch in a stack

Could somebody explain to me or share a link that explains the procedure to replace a defective switch in a stack?

 

Thanks

Guru Elite
Posts: 8,325
Registered: ‎09-08-2010

Re: Procdure to replace a switch in a stack

Are you using preset stack topology or relying on the election process?

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Frequent Contributor I
Posts: 61
Registered: ‎01-18-2012

Re: Procdure to replace a switch in a stack

We've changed the election priority on the different switches manually.

Guru Elite
Posts: 8,325
Registered: ‎09-08-2010

Re: Procdure to replace a switch in a stack

[ Edited ]

Please take a look at the procedure here: (you'll find the preset stack information about halfway down)

 

http://www.arubanetworks.com/techdocs/ArubaOS_73_Web_Help/Default.htm#mas_guides/aruba_stack/Stack_Member_Replacement.htm%3FTocPath%3DArubaStack%7C_____7

 


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Frequent Contributor I
Posts: 61
Registered: ‎01-18-2012

Re: Procdure to replace a switch in a stack

Thanks cappalli, exactly what I needed. (Now I feel sheepish due to the fact that it was in the user guide...)

Search Airheads
Showing results for 
Search instead for 
Did you mean: