Campus Switching and Routing

Reply
Occasional Contributor II

Switch configuration and integration in Central

Hello,

I have configured some 2930F devices and now I would like to know if I integrate those devices for management through Aruba Central, the existing configuration will be overwritten. In that case, is it possible to restore some parameters directly in CLI ?

Many thanks & best regards,
Franck

Occasional Contributor II

Re: Switch configuration and integration in Central

One of the options is using Template Groups.

 

template example:

%_sys_template_header%
%_sys_module_command%
hostname %_sys_hostname%
no cwmp enable
aruba-central enable
include-credentials
snmpv3 engineid %_sys_snmpv3_engineid%
vlan 1
name "DEFAULT_VLAN"
untagged 1-10
ip address dhcp-bootp
exit

vlan 100

name "VLAN100"

tagged 1

no ip address

exit

 

Other option is to add cli config through snippets.

 

 

Occasional Contributor II

Re: Switch configuration and integration in Central

Hello,

 

I see but now it is not required to put following command :

 

aruba-central enable

 

I think I'm gonna save config, erase swith, integrate in Central then try reproduce CLI config in central.

 

Many thanks.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: