Campus Switching and Routing

Reply
WB
New Contributor

Web-Gui on specific IP or hostname

Hi Guys,

 

I just bought a new aruba 2930f. I noticed that I could go to web gui using any IP that I configured. How do I change that using only assign IP for web-gui and how do I to web-GUI using hostname like switch1.company.com?

 

Thanks in advance.

New Contributor

Re: Web-Gui on specific IP or hostname

Hello WB, 

 

You can restrict access via the “ip authorized-manager” command. You can either make it via specific host (1.2.3.4/32) or via subnet (1.2.3.0/24). You can also lock it down via web GUI or other methods of access (ssh/telnet, tftp, snmp). 

 

http://h22208.www2.hpe.com/eginfolib/networking/docs/switches/K-KA-KB/15-18/5998-8150_access_security_guide/content/c_Using_Authorized_IP_Managers.html

 

Switch(config)# ip authorized-managers 
IPV4-ADDR Authorized manager IPv4 address.

 

Switch(config)# ip authorized-managers 1.2.3.4 
access Define an access level desired.
access-method Define an access method desired.
IPV4-MASK IP mask defining a group of adjacent manager IP addresses.
<cr>

 

Switch(config)# ip authorized-managers 1.2.3.4 255.255.255.255 
access Define an access level desired.
access-method Define an access method desired.
<cr>

Switch(config)# ip authorized-managers 1.2.3.4 255.255.255.255 access-method 
all 
ssh 
telnet 
web 
snmp 
tftp

 

 

Hopefully that anwsers your question!

 

Thanks!

Benny

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: