06-09-2014 10:37 AM
I am curious if there is a way to similarly add QoS to wired connections. We have a VOIP Vlan as per a standard install. We do not use any Wireless VOIP technology and that seems to be what all the guides are based around.
We have Mobility Switch 2500's that are the backbone of our network and a 7210 Controller. We just want to make sure call quality is something we take care of above internet traffic.
Switches are running 7.3.1 software
Controller is running 188.8.131.52 software
Solved! Go to Solution.
06-09-2014 11:00 AM
Have a look at the Voice over IP Deployment with MAS VRD: http://www.arubanetworks.com/vrd/VoIPwMASAppNote/w
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX
06-09-2014 11:02 AM
I did not see the VRD for it. I suppose because I was looking for Mobility Switch. I forget that their full name is Mobility Access Switch. Thank you for pointing me in the right direction as always!