Campus Switching and Routing

Reply
Occasional Contributor I

stacking interface add stk

Hope someone can help.........please.....................

 

We are trying to stack an Aruba S3500 and a S2500 without traditional stacking fiber cables. We would like to lag or ether channel 2 ports to the switches. DOes anyone have commands to do this. I have tried to re-search it all day and can't find anything without using the fiber cables in the slots......

 

We are trying to use ports 1 and 2 for the channel between switches.

 

Can someone help me please......................

 

Wall

Aruba

Re: stacking interface add stk

Wally,

Ports 22/23 and 46/47 are the QA qualified base stack ports for the S2500s and S3500-24P/T or 48P/T. The command to enable stacking on those ports is as follows:

 

(host) # add stacking interface stack <module/port>

 

So to enable port 46 or 47 it would be as follows:

 

add stacking interface stack 0/46

or

add stacking interface stack 0/47

 

It can be done from config mode or executive mode since they modify the stacking database and not the startup/running config.

 

The user-guide has these commands as well as the validated topologies.

 

http://www.arubanetworks.com/techdocs/ArubaOS_73_Web_Help/Default.htm#mas_guides/aruba_stack/Stacking.htm%3FTocPath%3DArubaStack%7C_____0

 

Best regards,

 

Madani

Occasional Contributor I

Re: stacking interface add stk

Thanks so much......The document alone was a huge help...........

 

Wally

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: