Command of the Day

Reply
Aruba Employee
Posts: 4
Registered: ‎04-06-2007

COTD: Show inventory

Looking for the controller serial number? The MAC address? This information is readily available with the "show inventory" command:

(surface2air) #show inventory 
Supervisor Card slot : 0
Supervisor FPGA : None
System Serial# : AA0000483
SC Assembly# : 2010024C (Rev:03.00)
SC Serial# : F00119907 (Date:03/21/06)
HW MAC Addr : 00:0B:86:60:02:DA to 00:0B:86:60:02:DB
Line Card 1 : Present
Line Card 1 FPGA : None
Line Card 1 Switch Chip : No Switch Chip
Line Card 1 Mez Card : Absent
Line Card 1 SPOE : Absent
Line Card 1 Sup Card 0 : Present ( Active )
Internal Temperature : 58.00 degrees Celsius (NORMAL)

This is particularly handy when activating a new software license which requires the controller serial number.
Contributor I
Posts: 76
Registered: ‎05-14-2009

AP

anyway you can pull the serial number for all APs?
Guru Elite
Posts: 20,002
Registered: ‎03-29-2007

Inventory




On the master controller, you would do a "show ap database long".

Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Validated Reference Design Guides : http://community.arubanetworks.com/t5/Validated-Reference-Design/tkb-p/Aruba-VRDs
Occasional Contributor II
Posts: 13
Registered: ‎09-22-2009

script to pull ap inventory as csv

Imagine you want the inventory of aps as a csv file to import into some documentation. This perl script might help.

http://udel.edu/~doke/aruba/aruba_inventory_csv
Search Airheads
Showing results for 
Search instead for 
Did you mean: