Command of the Day

Reply
Guru Elite

Find out the RSSI of your 3g card on your RAP

Have you ever wanted to find out the signal strength that your 3g-Connected RAP is seeing from the cell tower? "show ap debug system-status ap-name | include RSSI" will tell you:

(M3.arubanetworks.com) # show ap debug system-status ap-name randerson-ap70 | include RSSI
3G Uplink RSSI(in dBm) = -51


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

jr
New Contributor

Re: Find out the RSSI of your 3g card on your RAP

Doesn't seem to work with AOS 5.0.0.1, RAP-5wn and Sierra Wireless MC8700. This combination always reports -113 dBm regardless actual signal strength.

Also, how often this information is polled from 3G module or is it on-demand ie. when I query system-status answer is fetched from 3G module with AT command?

(FIHKIWL01) #show ap debug system-status ap-name FI.128.1.1 | include RSSI
3G Uplink RSSI(in dBm) = -113

(FIHKIWL01) #show ap debug system-status ap-name FI.129.1.1 | include RSSI
3G Uplink RSSI(in dBm) = -113

(FIHKIWL01) #show ap debug system-status ap-name FI.132.1.1 | include RSSI
3G Uplink RSSI(in dBm) = -113

(FIHKIWL01) #show ap debug system-status ap-name FI.138.1.1 | include RSSI
3G Uplink RSSI(in dBm) = -113
Guru Elite

5.0.2.1

That was a bug in the version you are using. Please upgrade to 5.0.2.1


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Frequent Contributor I

Re: Find out the RSSI of your 3g card on your RAP

that is awesome. now they just need airwave integration for it.
Occasional Contributor II

Re: Find out the RSSI of your 3g card on your RAP

this bug with the -113 RSSI happens on 6.0.0.1 and 6.0.1.2 as well.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: