Community Expert Day 1/17/14

Reply
MVP
Posts: 2,954
Registered: ‎10-25-2011

Interface assignation to Ports through webgui

I dont see its possible to do it thorugh GUI

 

If its not possible its comming anytime soon??

 

Cheers

Carlos

----------------------------------------------------
Product Manager - Aruba Networks
Alternetworks Corp
Aruba Employee
Posts: 3
Registered: ‎02-23-2012

Re: Interface assignation to Ports through webgui

Hello Carlos,

 

We already have a place in Webui where we can bind ports to Vlan.

 

Configuration>>COntroller>>Vlan and IP interfaces  and you can select which vlan should be mapped to which ports,

 

Are you looking for something specific ?? Please explain if I did not get the question right.

 

Thanks,

Tripta

MVP
Posts: 2,954
Registered: ‎10-25-2011

Re: Interface assignation to Ports through webgui

No no im not looking for that i dont think i explained myselft

I mean interface group! this!

 

interface-group gigabitethernet "User"
apply-to 0/0/0-0/0/6
lldp-profile "lldp-factory-initial"
poe-profile "poe-factory-initial"
switching-profile "User"

 I would like to pick the interface group and apply ports through GUI, i just see i can do it through CLI, or maybe you can do it on GUI and i don t know how

Cheers

Carlos

----------------------------------------------------
Product Manager - Aruba Networks
Alternetworks Corp
Aruba Employee
Posts: 2
Registered: ‎01-17-2014

Re: Interface assignation to Ports through webgui

Hi Carlos,

 

At this time our Mobility Access Switch's WebUI does not have an option to configure the same. But we do have this on the roadmap going forward.

 

Thanks and Regards,

Rajesh

MVP
Posts: 2,954
Registered: ‎10-25-2011

Re: Interface assignation to Ports through webgui

Well i hope you guys put it on the GUI, not really for me, i mean for our clients, they are used to configure everything through GUI.

And it would be really really easy to manage if i did configure all the templates and they just had to assign the ports to the template...

For example having

VOIP Template

User_Template

AP_Template

And so on

 

And for example if a ip phone is coming they would just need to go to the template and assign the port they wanted to it...

I could sell really easy managment with it


Cheers

Carlos

----------------------------------------------------
Product Manager - Aruba Networks
Alternetworks Corp
Aruba Employee
Posts: 2
Registered: ‎01-17-2014

Re: Interface assignation to Ports through webgui

Hi Carlos,

 

Thanks a lot for your precious feedback. I will pass it along to concerned folks.

 

Thanks and Regards,

Rajesh

Search Airheads
Showing results for 
Search instead for 
Did you mean: