Clone AP Configuration

alc
Retired Employee

Symptoms

I am trying to clone the configuration from one AP to another. Im running this command

 

conf t

ap-name AP01

clone AP02

 

and then i get this message "AP name 'AP02' undefined"

 

Am i missing something to run this command? It's between two RAP5 and im running version 6.1.2.4 and even tried on a 6.2.0.2 version.

Diagnosis

 

The reason why I want to clone the configuration from one RAP5 to another is because that RAP5_01 works with a 3g dongle and i want RAP5_02 to have the same configuration to work with a 3g dongle as well.

So copying the AP-group wont work in this case.

Solution

The 3g/4g card configuration is not located on the controller.  It is programmed into the flash of individual devices.  If you want to program them into multiple devices, you can use a provisioning profile:

 

https://arubanetworkskb.secure.force.com/pkb/articles/HowTo/R-1216

 

Version history
Revision #:
1 of 1
Last update:
‎06-17-2013 11:34 AM
Updated by:
alc
 
Contributors
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: