[8.x] Increase DHCP Lease Limit

MVP
MVP
Q:

How to increase DHCP Lease Limits in 8.x controller architecture?



A:

Starting from ArubaOS 8.2.0.0 and above by default, the DHCP lease limits for the 7000 SeriesControllers are increased to those of the user limits. Also, a new CLI command, ip dhcp increase-lease-limit, is introduced in ArubaOS 8.2.0.0 and above for additional DHCP scope.

The following table provides the changes in the DHCP lease limits for the 7000 SeriesControllers in ArubaOS 8.2.0.0 as compared with those in previous releases:

The output of the show ip dhcp statistics command is enhanced to show a warning if the DHCP lease limit of a 7005, 7008, or 7010 Controller is increased beyond the user limit.

Version history
Revision #:
1 of 1
Last update:
‎02-28-2018 01:36 AM
Updated by:
 
Comments
WiFivomFranMan

#protip,  I seem to recall this number counts the whole subnet you have the DHCP tied to.  It isn't just the pool itself.  So if you have a /24 and only have pool of  100 DHCP address it will claim 256 from your total.  

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: