Controller Based WLANs

Description about "show datapath port untrusted-vlan" command?

Aruba Employee

Question: Description about "show datapath port untrusted-vlan" command?



Product and Software: This article applies to all Product and Software.

This table is used to check the trusted-ness of the VLANs under a port.




If all the VLANs are trusted the command output will be blank.




We can also check VLAN trusted/untrusted using "show interface gigabitethernet <slot/module/port> {trusted-vlan | untrusted-vlan}"commands.




If we just run "show interface gigabitethernet <slot/module/port>" it will show if physical port is trusted or untrusted (Last line)





Version history
Revision #:
1 of 1
Last update:
‎11-10-2014 06:02 AM
Labels (1)
Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.