Enabling gigabit ports for upgrading 7205 controller from cpboot mode

Aruba Employee
Q:

How can we enable gigabit ports for upgrading 7205 controller from cpboot mode ?



A:

We need to use the following commands to enable gigabit ports:

For Ports 0-3, 

cpboot>setenv ethact ge-0”
cpboot>pfe mgmt.
cpboot>save
cpboot>tftp

We can use TFTP command post the above. Any of the ports 0-3 can be used for performing the upgrade.

Version history
Revision #:
2 of 2
Last update:
‎03-23-2017 03:35 PM
Updated by:
 
Labels (1)
Contributors
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.