Controller Based WLANs

How do I identify that AP that is right above me with the ap-led command in the enable mode?

by on ‎07-07-2014 12:40 PM

Question:  How do I identify that AP that is right above me with the ap-led command in the enable mode?

 

Product and Software: This article applies to AP-12x and 5Wx APs and ArubaOS 3.3.x and later.


(M3.arubanetworks.com) #ap-leds ?
all Control LEDs on all APs
ap-group Control LEDs on APs in this group
ap-name Control LEDs on AP with this name
ip-addr Control LEDs on AP at this IP address
wired-mac Control LEDs on AP at this MAC address
(M3.arubanetworks.com) #ap-leds ap-name conference-room-1 ?
blink Make LEDs blink for identification
normal Restore LEDs to their normal behavior
(M3.arubanetworks.com) #ap-leds ap-name conference-room-1 blink

Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.