Controller Based WLANs

How do we check the latency recorded by Health Check Manager (HCM ) in ArubaOS 6.4.3 and above?

by on ‎05-18-2016 01:36 PM - edited on ‎05-28-2016 01:50 AM by Guru Elite Guru Elite

Q:

How do we check the latency recorded by Health Check Manager (HCM ) in ArubaOS 6.4.3 and above?

 

 



A:

  • Latency container will display latency details recorded by HCM in order of  milliseconds only
  • Any measurement < 1 ms will be  reported as zero by HCM and same will be reflected in graph

 

To check latency details in backend see the following 

(Aruba7010) #show ip health-check

IP Health-check Entries

-----------------------

Probe IP     Src Interface  State  Probe-Profile  Avg RTT(in ms)

--------     -------------  -----  -------------  --------------

10.16.66.6   vlan 100       Down   default              0

10.16.66.6   vlan 200       Up         default              0

192.168.2.1  --                   Up         default              0

  • If uplink is not configured , the tab will display “Data not found” 

 

Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.