Controller Based WLANs

How to audit trail all commands which were running in Controller?

Question: How to audit trail all commands which were running in Controller?

 

By default, audit trail is enabled for all commands in configuration mode. Use the show audit-trail command to
display the content of the audit trail.

For example:

(Master) (config) #show audit-trail 5

Sep 28 10:59:24  fpcli: USER:admin@10.240.104.110 COMMAND:<wlan ssid-profile "temp-ssid" > -- command executed successfully
Sep 28 10:59:27  fpcli: USER:admin@10.240.104.110 COMMAND:<wlan ssid-profile "temp-ssid" essid "temp" > -- command executed successfully
Sep 28 10:59:35  fpcli: USER:admin@10.240.104.110 COMMAND:<wlan virtual-ap "temp-vap" > -- command executed successfully
Sep 28 10:59:40  fpcli: USER:admin@10.240.104.110 COMMAND:<wlan virtual-ap "temp-vap" ssid-profile "temp-ssid" > -- command executed successfully
Sep 28 10:59:48  fpcli: USER:admin@10.240.104.110 COMMAND:<wlan virtual-ap "temp-vap" vlan "4" > -- command executed successfully

Enable "audit-trail all" will include all commands in configuration mode and enable mode.

For example:

(Master) #show audit-trail 10

Sep 28 10:59:24  fpcli: USER:admin@10.240.104.110 COMMAND:<wlan ssid-profile "temp-ssid" > -- command executed successfully
Sep 28 10:59:27  fpcli: USER:admin@10.240.104.110 COMMAND:<wlan ssid-profile "temp-ssid" essid "temp" > -- command executed successfully
Sep 28 10:59:35  fpcli: USER:admin@10.240.104.110 COMMAND:<wlan virtual-ap "temp-vap" > -- command executed successfully
Sep 28 10:59:40  fpcli: USER:admin@10.240.104.110 COMMAND:<wlan virtual-ap "temp-vap" ssid-profile "temp-ssid" > -- command executed successfully
Sep 28 10:59:48  fpcli: USER:admin@10.240.104.110 COMMAND:<wlan virtual-ap "temp-vap" vlan "4" > -- command executed successfully
Sep 28 11:08:47  fpcli: USER:admin@10.240.104.110 COMMAND:<dir > -- command executed successfully
Sep 28 11:08:51  fpcli: USER:admin@10.240.104.110 COMMAND:<show ap essid > -- command executed successfully
Sep 28 11:09:34  fpcli: USER:admin@10.240.104.110 COMMAND:<dir > -- command executed successfully
Sep 28 11:11:07  fpcli: USER:admin@10.240.104.110 COMMAND:<copy flash: "default.cfg" flash: "default-bak.cfg" > -- command executed successfully
Sep 28 11:12:14  fpcli: USER:admin@10.240.104.110 COMMAND:<show wlan ssid-profile > -- command executed successfully

Version History
Revision #:
1 of 1
Last update:
‎07-01-2014 05:10 PM
 
Labels (1)
Contributors
Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.