Controller Based WLANs

How to check if 802.11b protection mode is enabled on Access Point (AP)?

When 802.11 b protection is enabled, its allow 802.11b station to associate to the Access Point (AP).

 

To check the configured value, type the following command from the CLI.

 

(Aruba2400) #show ap details ip-addr 10.100.101.51 | include 802.11b

 

802.11b Protection Enabled Configuration

Version history
Revision #:
1 of 1
Last update:
‎07-10-2014 09:22 AM
Updated by:
 
Labels (1)
Contributors
Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.