Controller Based WLANs

How to convert Campus AP to Remote AP through CLI

Introduction : This Article explains how to convert Campus AP to Remote AP using static parameters

 

Environment : This applies to all Campus APs

 

Configuration Steps :

 

Convert Campus AP to Remote AP through CLI:

1. Console into the Campus AP
2. Enter into apboot mode and execute the following commands


apboot>setenv remote_ap 1
apboot>setenv master <public ip address of the controller>
apboot>setenv serverip <public ip address of the controller>

Optional:
apboot>setenv ipaddr x.x.x.x
apboot>setenv netmask x.x.x.x
apboot>setenv gatewayip x.x.x.x

3. Save and reboot the AP
 

 

Version History
Revision #:
1 of 1
Last update:
‎07-08-2014 03:10 PM
Updated by:
 
Labels (1)
Contributors
Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.