Controller Based WLANs

How to enable periodic synchronization of the Mobility controller with the Activate server?

Aruba Employee
Requirement:

The Mobility Controller should be minimum running AOS: 6.5.0.4 or above.



Solution:

Starting from AOS: 6.5.0.4 a new command "activate periodic-sync" was introduced to enable/ disable periodic synchronization of the Mobility controller with the Activate server.

Note: This command is available only in the configuration mode.



Configuration:

From CLI:

Enable:

(Master) #configure terminal
Enter Configuration commands, one per line. End with CNTL/Z

(Master) (config) #activate periodic-sync enable

Disable:

(Master) #configure terminal
Enter Configuration commands, one per line. End with CNTL/Z

(Master) (config) #activate periodic-sync disable

From WebUI:

At the moment this option is available only from CLI and not available from WebUI.



Verification

Enable:

(Master) #show running-config | begin periodic-sync
Building Configuration...
activate periodic-sync enable
end

Disable:

(Master) #show running-config | begin periodic-sync
Building Configuration...
activate periodic-sync disable
end
Version history
Revision #:
2 of 2
Last update:
‎03-24-2017 03:48 PM
Updated by:
 
Labels (1)
Contributors
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.