Controller Based WLANs

How to identify by looking AP 104 that which Antennas are A0/A1 and Radios are R0/R1?

Aruba Employee

QuestionHow to identify by looking AP 104 that which Antennas are A0/A1 and Radios are R0/R1?

 

AP 104 has 4 connectors which are used for external antennas and out of 4 connectors; 2 for each band/radio.

At the beside of connectors it's tagged each antenna ports however if it's not there below picture tells which one is which.

 

rtaImage.png

 

The AP 104 is designed for use with external antennas and equipped with four external, female RP-SMA antenna connectors.

Antenna connector mapping:

R0/A0: Radio 0 (5 GHz), chain 0
R0/A1: Radio 0 (5 GHz), chain 1
R1/A0: Radio 1 (2.4 GHz), chain 0
R1/A1: Radio 1 (2.4 GHz), chain 1

R0 = Radio Zero
R1 = Radio One
A0 = Antenna Zero
A1 = Antenna One

Version history
Revision #:
1 of 1
Last update:
‎07-11-2014 03:34 PM
 
Labels (1)
Contributors
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.