Introduction of 'W' flag in show datapath bridge

Aruba Employee
Q:

What does the W flag in show datapath bridge table means?



A:

A New flag, W (Wi-Fi), is introduced as a part of the show datapath bridge command to indicate that the source of the bridge entry is learned through a Wi-Fi tunnel. 

This Flag was introduced from Aruba OS 6.4.3.11, 6.4.4.11 and 6.5.1.2 and above


A sample output of the command is as follows:
(host) #show datapath bridge
Datapath Bridge Table Entries
-----------------------------
Flags: P - Permanent, D - Deny, R - Roamed Client, M - Mobile,
             X - Xsec, A - Auth, T - Trusted, W – Wifi
MAC                           VLAN        Assigned VLAN        Destination Flags  Age
-----------------              --------        -------------                  -----------       -------    ----
00:1A:1E:00:1A:E8       1                  1                          0/0/0                          0
00:1A:1E:00:D3:E0      40                40                         local                P        0
01:80:C2:00:00:0E       4095           4095                     local                P        0
01:80:C2:00:00:02       4095           4095                     local                P        0
00:0B:86:16:6A:A0      1                  1                           0/0/0                          0
3C:77:E6:7C:44:09       40                40                         tunnel 12       W       0

Version history
Revision #:
2 of 2
Last update:
‎03-24-2017 07:26 AM
Updated by:
 
Labels (1)
Contributors
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: