Q:
How to check the pending client match steer entries?
The pending client-match entries (where the moves have not completed) are no longer displayed in the output of the show ap arm client-match history command which now displays only the last 32 completed moves.
Starting from ArubaOS 6.4.4.8, a new parameter 'pending' is introduced in the 'show ap arm client-match' command.
This parameter is introduced to filter and view only the pending client-match entries.
The following sample displays the pending client-match entries:
(host) #show ap arm client-match pending S: Source, T: Target, A: Actual BTM-ACC: 11v BTM Accept, BTM-REJ#: 11v-BTM Reject with reason #, BTM-TO: 11v-BTM Timeout, BTM-FA: 11v-BTM False Accept Unit of Roam Time: second Unit of Signal: dBm ARM Client match History ------------------------- Time of Change Station Reason Status/Roam Time/Mode -------------- ------- ------ --------------------- 2016-05-24 15:53:26 xx:xx:xx:xx:xx:xx Sticky Pending/5403/Deauth 2016-05-24 13:08:01 yy:yy:yy:yy:yy:yy Sticky Pending/15328/Deauth Signal(S/T/A) Band(S/T/A) Radio Bssid(S/T/A) AP Name(S/T/A) ------------- ----------- ------------------ -------------- -89/-59/- 5G/5G/- 11:11:11:11:11:11/22:22:22:22:22:22/- AP1/AP2/- -83/-64/- 5G/5G/- 22:22:22:22:22:22/33:33:33:33:33:33/- AP2/AP3/-
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.