Controller Based WLANs

RADIUS accounting for open SSID

by ‎03-07-2016 01:32 PM - edited ‎03-07-2016 01:32 PM
Requirement:
  • This request came from a requirement where we wanted to bill users who are connected to a specific open system SSID.
  • As a part of requirement Radius accounting feature can be enabled for user connecting to Open SSID 

 

 



Solution:
  • As per this implementation the Radius accounting has been extended to stations connecting to Open SSID  from 6.4.3.0 release.
  • The feature can be done by enabling the Open SSID accounting knob in AAA profile.
  • We support Radius Accounting Start, Interim & Stop messages.

 

TOPOLOGY:

 



Configuration:

Configurations Using CLI

 

Enable Open SSID Accounting:

# aaa profile Paaa
#open-system-radius-accounting
#!
#show aaa profile Paaa
.
.
RADIUS Accounting Server Group      svrGrp   
Open SSID radius accounting         Enabled

 

 Disable Open SSID Accounting:

# aaa profile Paaa
#no open-system-radius-accounting
#!
 


WebUI:

  • Navigate to Configuration ->All Profile ->Select Wireless LAN 
  • Select Specified aaa profile under AAA section
  • Enable “Open SSID accounting” knob in aaa profile
     


 



Verification

Enable Below Logs to get the accounting info in Security Logs:


#logging level debugging security
#logging level debugging security process authmgr subcat aaa

Show log security output:

Radius Accounting  Start Message details:

Logs

 

Radius Accounting  Stop  Message:

 

 

Radius interim accounting Message:

 

 

 


Auth-tracebuf output:


23:06:39  rad-acct-start        ->  00:1c:7b:9e:d9:3a  00:24:6c:80:42:c5/RADIUS  -  -
23:11:20  rad-acct-stop         ->  00:1c:7b:9e:d9:3a  00:24:6c:80:42:c5/RADIUS
23:25:45  rad-acct-int-update   ->  00:1c:7b:9e:d9:3a  00:24:6c:80:42:c5/RADIUS  -  -

 

 

 

 

Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.