Controller Based WLANs

Unable to delete a SNMPV3 User or a Trap Receiver under SNMP configuration on the controller ?

by on ‎06-29-2014 03:40 PM

Environment : This article applies to Aruba Mobility Controllers running ArubaOS version 5.0 and Above.

 

When WMS offload is enabled on AirWave, a set of commands are pushed via SSH to all Aruba Master Controllers to offload WMS and AirWave creates a new SNMPv3 user on the controller.

rtaImage.png
 
This entry can be removed from SNMPv3 users or Trap Receivers by deleting the MMS configuration under Configuration > General > Mobility Manager Servers. But if the Status of the MMS is Active ( which is denoted with an asterisk symbol ) Airwave will keep on creating the entry under MMS , hence remove the WMS offload configuration in the AirWave in such case.

 
rtaImage.png
 
To understand what is WMS offload please refer the below Article
 

 

Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.