We can send the output of "show" commands to a file on the controller.

Aruba Employee
Question How can we send the output of show commands ran in CLI during troubleshooting to a file on the controller?
Environment This article applies to AOS 6.3 and above

 

 

While running the show commands in the CLI during troubleshooting, if we add "| redirect-output" to any show command.
 
#show ap active | redirect-output
  'show ap active ' is written into redirect-output.log ...
  
File will be created if it doesn’t exist or the show output will be appended to the file if the file already exists 
 
This file would appears under “dir” and can be extracted using ftp/tftp/scp
 
#dir
-rw-r--r--    1 root     root        33995 Jun 27 19:44 redirect-output.log

 

Version history
Revision #:
1 of 1
Last update:
‎07-11-2014 02:48 PM
 
Labels (1)
Contributors
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: