Controller Based WLANs

What does this message mean when I add a VIA client: "ISAKMP stack could not be initialized??

by on ‎07-04-2014 02:03 PM

Product and Software: This article applies to all Aruba controllers running ArubaOS 5.x and later.

If the VIA client is configured to use a PSK, and if an IKE-PSK is not configured in controller, this message is displayed:

"ISAKMP stack could not be initialized"

To add the PSK using the webUI, go to Advanced Services > VPN and add the PSK.

To add the PSK using the CLI, issue this command:

(aruba) (config) #crypto isakmp key <pre-shared-key> address 0.0.0.0 netmask 0.0.0.0

Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.