Controller Based WLANs

What value must be selected for antenna when AP-85 is provisioned?

Aruba Employee

Product and Software: This article applies to Aruba AP-85.

 

AP-85 has four antenna connecting ports; two for 802.11a and two for 802.11g. If you have two antennas, one for 2.4 GHz and the other for 5 GHz, then you must select the following values:

 

  • If the antenna is connected to port1 of 802.11a or 802.11g, then 1 must be specified as the value.

  • If the antenna is connected to port2 of 802.11a or 802.11g, then 2 must be specified as the value.

  • If two antennas are connected to the 802.11a or 802.11g, then the "both" option must be specified.

 

AP "ARUBA" Provisioning Parameters

----------------------------------------

Item Value

---- -----

AP Name ARUBA

AP Group ARB

Location name N/A

SNMP sysLocation N/A

Master 10.2.1.2

Gateway 10.2.1.1

Netmask 255.255.255.0

IP Addr 10.2.1.29

DNS IP N/A

Domain Name N/A

Server Name N/A

Server IP 10.2.1.2

Antenna gain for 802.11a 1

Antenna gain for 802.11g 1

 

Antenna for 802.11a both

Antenna for 802.11g both

Version history
Revision #:
1 of 1
Last update:
‎07-02-2014 05:19 PM
Updated by:
 
Labels (1)
Contributors
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.