Controller Based WLANs

Why is AP-125 temperature shown in Celsius instead of Fahrenheit?

Aruba Employee

Product and Software: This article applies to all Aruba controllers and ArubaOS 3.3.1.0.

 

In the product specifications for the AP-120 series APs, the normal operating temperature range is listed as 0 - 50 degree Celsius (32F to 122F).

 

When you poll an AP-125 with the following command:

 

Aruba#show ap debug system-status ap-name <AP-name>(or)

Aruba# show ap debug system-status ip-addr <IP-addr> | begin Temp

 

The result, beginning with the keyword "Temperature", is:

 

Temperature

-----------

74 C

 

The output shows Celsius, however, this is incorrect. The output should have the letter F indicating Fahrenheit and not Celsius, since the overall room temperature is about 72F. This bug has been fixed in 3.3.1.14.

 

Note: Bug ID: 27657

Version history
Revision #:
1 of 1
Last update:
‎07-09-2014 04:05 PM
Updated by:
 
Labels (1)
Contributors
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.