Controller Based WLANs

Why is Non-Aruba AP always auto-classified as valid AP?

When the learn-AP option is enable, all the third party APs will be classified as valid Access Point (AP). 
The default value is disabled, this will make the controller to classify these third party AP as either rogue or interfering AP. 

To check if the configured learn-ap option, Use the following CLI command. 

show wms general 

To enable or disable learn-ap option, type the following commands from the CLI. 

conf t 
wms general learn-ap  {enable|disable} 
end 
write mem

Version history
Revision #:
1 of 1
Last update:
‎07-10-2014 09:17 AM
Updated by:
 
Labels (1)
Contributors
Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.