Controller-less WLANs

Does IAP support configuring different ARM power ranges for the a-radio and g-radio bands?
Q:

Does IAP support configuring different ARM power ranges for the a-radio and g-radio bands? 



A:

For controller based APs (ArubaOS), we can map separate ARM profiles and configure different tx-power ranges for the a-radio and g-radio. 
However, IAP didn't support configuring different ARM power ranges for differnt bands until 6.4.3.1-4.2.0.0 where the same ARM power range was applied to both radios. 

In Instant 6.4.3.1-4.2.0.0, the Customize ARM power range option is added to the radio profile configuration window to allow administrators to set transmit power limits for a specific radio band.  

 

Instant ARM in Pre 4.2 

 

Instant ARM 4.2 and above 

Version History
Revision #:
2 of 2
Last update:
‎03-29-2017 12:09 PM
Updated by:
 
Labels (1)
Contributors
Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.