Controller-less WLANs

How do I configure wired 802.1x with MAC authentication on Aruba instant?

Aruba Employee

Product and Software: This article applies to Aruba Instant 3.2

 

To configure a MAC authentication and 802.1x authentication for wired client follow the below steps:

Step 1: 
We can configure the 
MAC authentication and 802.1x authentication from two places as show below:

 

rtaImage.png

 

Step 2: If you have profile created and want to make changes we can do it from "Configuration" or "Wired" however if need to create "New" or "Delete" old profile that can only be done under "Wired" option.

 

rtaImage (1).png

 

 

Step 3: Select "Employee" option for Primary usage

 

rtaImage (2).png

 

 

Step 4: Under VLAN Management we can configure the port either Trunk (Native and Allowed VLAN List) or Access Port (One Access VLAN).

 

rtaImage (3).png

 

Step 5: Enable MAC Authentication and Enable the MAC authentication fail-thru.

 

rtaImage (4).png

 

 

Step 6: Map the Policies.

 

rtaImage (5).png

 

Step 7: Under Wired Networks we can see the new created profile and can be mapped to the Instant Access Point Ethernet ports.

 

rtaImage (6).png

 

Version history
Revision #:
1 of 1
Last update:
‎07-03-2014 11:39 AM
Updated by:
 
Labels (1)
Contributors
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.