Question: How do I enable Telnet access to an Aruba Instant APs?
Product and Software: This article applies to all Aruba Instant platforms and versions.
To enable Telnet access to an Aruba Instant APs, follow these steps:
1) Click the Settings option on the top right corner of the screen.
2) Click the Advanced Tab.
3) Enable Terminal Access.
4) Click OK to save settings.
d8:c7:c8:c9:95:11# config terminal
d8:c7:c8:c9:95:11 (config) # terminal-access
d8:c7:c8:c9:95:11 (config) # exit
Then use Windows CLI or a terminal emulator program (putty) and use port 23 for Telnet access to the Instant AP.