Controller-less WLANs

How is the image on the Aruba Instant AP managed?

by on ‎07-02-2014 03:25 PM

Product and Software: This article applies to all Aruba Instant platforms and versions.

 

With Aruba Instant, the flash has been divided into two partitions: Partition 0 and Partition 1

 

When an IAP is terminated to a controller, Partition 0 is updated to the version that is running on the controller, but Partition 1 retains the IAP code.

 

When the reset button is pressed, the code on Partition 0 is cleared and the IAP boots using Partition 1 (with the IAP code). The IAP uses the original configuration when it is reverted back from operating as a campus AP.

Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.