Controller-less WLANs

How to configure Backup AMP (Airwave Management Platform) Server information in Aruba Instant APs?

by on ‎07-03-2014 12:53 PM

This article contains:

a. Enhancements made in OS version 6.1.3.4-3.1 related to AMP redundancy
b. Configuration of backup AMP on IAP

 

With OS version 6.1.3.4-3.1, AMP redundancy has been added wherein, we can configure a backup Airwave server IP in the web UI, in addition to the existing Airwave server. If the primary AMP goes down IAP will switch over to the backup server.
The backup airwave server must be configured to use the same ams-identity as the primary, or the IAP will reject the backup airwave server.

 

 

Environment : This article applies to all the IAP running on OS version 6.1.3.4-3.1.x.x. Any IAP running any prior version will not have this feature.

 

From WebUI:

  1. Navigate to Settings> Admin> Add the backup server IP address
  2. Click on OK at the bottom to save the changes.

rtaImage.png

 

 

From CLI:

IAP# configure terminal
IAP (config) # ams-backup-ip 192.168.15.203

 

In order to verify:

 

rtaImage (1).png

 

Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.