Controller-less WLANs

How to configure called-station-ID and Calling-station-ID in IAP ?
Requirement:

Till 4.2 , we couldn't modify the default Calling-Station-ID and Called-Station-ID values  . It was always the default values and non configurable .



Solution:

With the newer features added in 4.3 release , This implementation is used for customizing Calling-Station-ID and Called-Station-ID.

Note: This feature is only  supported in CLI, and not in  WebUI .



Configuration:

IAP # configure t

IAP (config) # wlan ssid-profile test

IAP (SSID Profile "test") # use-ip-for-calling-station

IAP (SSID Profile "test") # called-station-id ?

include-ssid    

type             Network Type - employee or guest or voice

IAP (SSID Profile "test") # called-station-id type ?

<csid_type>     {ap-group|ap-name|ipaddr|macaddr|vlan-id, default is macaddr}

IAP (SSID Profile "test") # called-station-id type ap-name

IAP (SSID Profile "test") # called-station-id include-ssid delimiter #

IAP (SSID Profile "test") # end

IAP # commit apply

 

Command detail:

1.Use client IP for calling-station-id, if client doesn’t get IP, use client mac address.

2.Use AP name for called-station-id.

3.Called-station-id includes essid name, and delimiter is #.



Verification

show running-config | begin ssid-profile

wlan ssid-profile test
 enable
 index 1
 type employee
 essid test
 opmode opensystem
 max-authentication-failures 0
 rf-band all
 captive-portal disable
 use-ip-for-calling-station                            ---------------------- >>  Replace client mac with client ip for calling-station-id
 called-station-id type ap-name                 ---------------------- >>  Customize called-station-id
 called-station-id include-ssid                    ---------------------- >>  Customize called-station-id
 dtim-period 1
 broadcast-filter none
 dmo-channel-utilization-threshold 90
 local-probe-req-thresh 0
 max-clients-threshold 64

Calling-Station-ID and Called-Station-ID in radius request packet.

Calling-Station-ID and Called-Station-ID in accounting packet

Version History
Revision #:
2 of 2
Last update:
‎03-31-2017 05:57 AM
Updated by:
 
Labels (1)
Contributors
Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.