Controller-less WLANs

How to disable USB functionality in IAP-205H?
Requirement:

Prior to 4.2 code, USB function is enable by default and we cannot modify it. How to disable USB functionality in IAP-205H?



Solution:

In 4.2 code, we have a command to disable the USB functionality.

We need to reboot the IAP, only then the command will take effect.



Configuration:

Config:

To Disable USB functionality:

 24:de:c6:cf:5b:de# usb-port-disable

Note: Command takes effect after AP reboot.

To Enable USB functionality:

24:de:c6:cf:5b:de# no usb-port-disable

Note: Command takes effect after AP reboot

 



Verification

The #show ap-env command will tell us does the USB functionality is enabled or not.

 

24:de:c6:cf:5b:de# show ap-env

 

Antenna Type:Internal

usb-port-disable:1 

 

0 ==> USB functionality enabled

1==> USB functionality disabled.

Version history
Revision #:
2 of 2
Last update:
‎07-30-2015 04:15 AM
Updated by:
 
Labels (1)
Contributors
Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.