Controller-less WLANs

How to enable/disable USB uplink on Instant 4.2?
Q:

How to enable/disable USB uplink on Instant 4.2?



A:

This article applies to Instant 4.2 and above.

 

Before Instant 4.2 USB function is enabled by default  and will not be able to modify if we need to however from 4.2 and above we have an option to disable; find below.

Config by CLI

24:de:c6:cf:5b:de# usb-port-disable

Remind: Command takes effect after AP reboot.

24:de:c6:cf:5b:de#

24:de:c6:cf:5b:de# no usb-port-disable

Remind: Command takes effect after AP reboot.

24:de:c6:cf:5b:de# show ap-env

Antenna Type:Internal

usb-port-disable:1

 

Config by UI

Per AP setting-->Uplink-->USB port -->Enable/Disable

 

 

Note:

After the configure with usb port “usb-port-disable ” or “no usb-port-disable ” to reload the IAP IS required.

Version History
Revision #:
2 of 2
Last update:
‎07-30-2015 06:00 AM
Updated by:
 
Labels (1)
Contributors
Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.