Controller-less WLANs

LACP coexistence with related features

by on ‎06-30-2014 03:04 PM

Question  :               How does eth0-bridging and dual-uplink affect LACP in IAP?


Environment   :      Aruba Instant AP deployment with LACP feature in use.

 

Answer :                 LACP, Eth0-Bridging & Dual-Uplink are related features which can affect other's behavior. Eth0-Bridging & Dual-Uplink are manual configuration i.e. admin intentionally makes configuration on IAP while LACP is a dynamic feature which gets configured by receiving LACPDU from uplink switch. The thumbrule is manual configuration takes precedence over dynamic configuration. Below table outlines how eth0-bridging and dual-uplink affect LACP's behavior.

 

rtaImage.jpg

Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.