USB disable/enable on IAP

by ‎07-31-2015 07:50 AM - edited ‎07-31-2015 07:50 AM
Q:

Is there an option to disable/enable USB ports on IAP?



A:

USB port is enabled by default in earlier Instant versions and it cannot be modified. Starting 4.2, it provides WLAN user an option to enable or disable per his/her requirement.

Note: Any changes made to USB profile will take effect only after rebooting that AP.

 

Enable/Diable USB Port using CLI:


24:de:c6:cf:5b:de# usb-port-disable 
Remind: Command takes effect after AP reboot.
24:de:c6:cf:5b:de# 
24:de:c6:cf:5b:de# no usb-port-disable 
Remind: Command takes effect after AP reboot.
24:de:c6:cf:5b:de# show ap-env

Antenna Type:Internal
usb-port-disable:1

 

Enable/Diable USB Port using WebUI:

 

Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.